DSL Conductor bar – track are super finished and cross section is maintained to achieve required ampere. The material for track is Aluminum. Conductors shall be accurately aligned to ensure positive electrical contact between current collector and the conductor. Separate conductors shall be provided for each phase. Insulation cover shall be rigid PVC. Range of Ampere available with the material of Aluminium.
Aluminium : 400 Amp. to 1200 Amp.
|Type||Bolt Jointed Type "Heavy Duty" Bus Bar|
|Insulation Type||PVC (IP35)|
|Ampere Capacity||ALUMINIUM : 400 to 1500 Amp.|
|Pole Type||1 Pole : Individual.|
|Jointer Type||Bolt Jointed Type|
|Standard Length||4.0 Mtr. (4000mm) or 4.5 Mtr. (4500mm)|
|Mounting Bracket Distance Pitch||1500 mm|
|Hanger Clamp||1 Pole : Per Mtr. 4 Nos.|
|Jointer||Bus bar Jointer is required to Joint 2 bus bars of Standard length of 4.5 Mtr. Or 4 Mtr. to make a long travel up to required distance.|
|Joint Cover||Joint cover is used to cover each joint.|
|End Cap||End Cap is used to cover DSL ends on either side. That is required one for one Bar/phase.|
|End Power Feed||For DSL system that is powered from ends, "End power feed" is required for Power supply to whole Bus bar system. That is required separately for each phase.|